Nema 34 (86mm) Sato ball screw stepper motor
>> Katrangan singkat
| Tipe Motor | Stepper bipolar |
| Sudut Langkah | 1.8° |
| Tegangan (V) | 3 / 4.8 |
| Saiki (A) | 6 |
| Resistance (Ohm) | 0,5 / 0,8 |
| Induktansi (mH) | 4 / 8.5 |
| Kabel Timbal | 4 |
| Panjang Motor (mm) | 76 / 114 |
| Suhu sekitar | -20 ℃ ~ +50 ℃ |
| Munggah Suhu | 80K Maks. |
| Kekuwatan dielektrik | 1mA maks.@ 500V, 1KHz, 1Sec. |
| Ketahanan Isolasi | 100MΩ Min.@500Vdc |
Ball meneng motor stepper ngowahi gerakan Rotary kanggo gerakan linear, karo nggunakake meneng werni;meneng werni wis macem-macem kombinasi diameteripun lan timbal, kanggo gawe marem syarat aplikasi beda.
Ball screw stepper motor biasane digunakake ing aplikasi sing mbutuhake gerakan linear presisi dhuwur, umur dawa, efisiensi dhuwur, kayata otomatisasi industri, piranti semikonduktor, lsp.
ThinkerMotion nawakake macem-macem motor stepper meneng bal (NEMA 8, NEMA11, NEMA14, NEMA17, NEMA23, NEMA24, NEMA34) kanthi beban saka 30N nganti 2400N lan macem-macem gelar (C7, C5, C3) saka meneng bal.Kustomisasi bisa diproses saben panyuwunan, kayata dawa sekrup & ujung sekrup, kacang, rem magnetik, encoder, lsp.
>> Sertifikasi
>> Parameter Listrik
| Ukuran Motor | Tegangan/ Urutane (V) | saiki/ Urutane (A) | Resistance/ Urutane (Ω) | Induktansi/ Urutane (mH) | Jumlah Kabel Timbal | Inersia rotor (g.cm2) | Bobot Motor (g) | Motor Panjang L (mm) |
| 86 | 3 | 6 | 0.5 | 4 | 4 | 1300 | 2400 | 76 |
| 86 | 4.8 | 6 | 0.8 | 8.5 | 4 | 2500 | 5000 | 114 |
>> 86E2XX-BSXXXX-6-4-150 standar njaba motor outline drawing
Notes:
Dawane sekrup timbal bisa disesuaikan
Mesin selaras sregep ing mburi meneng timbal
Hubungi kita kanggo specifications meneng werni liyane.
>> Ball nut 1605 outline drawing
>> Ball nut 1610 outline drawing
>> Ball nut 1616 outline drawing
>> Kacepetan lan tikaman kurva
86 seri 76mm motor dawa bipolar Chopper drive
100% frekuensi pulsa saiki lan kurva dorong
86 seri 114mm motor dawa bipolar Chopper drive
100% frekuensi pulsa saiki lan kurva dorong
| Timah (mm) | Kacepetan linear (mm/s) | |||||||||
| 5 | 2.5 | 5 | 7.5 | 10 | 12.5 | 15 | 17.5 | 20 | 22.5 | 25 |
| 10 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 |
| 16 | 8 | 16 | 24 | 32 | 40 | 48 | 56 | 64 | 72 | 80 |
Kondisi tes:
Chopper drive, ora ramping, setengah mikro stepping, voltase drive 40V
